Dial Up Plumbing: Water Leak Detection Sydney (2024)

At Dial Up Plumbing, our plumbers are experts when it comes to installation and repairs for your pipes and leaks. From PVC S-bends to concrete sewer pipes, we provide a complete leaking tap service for all domestic and industrial applications. A leak detection service is appropriate for you, if your property is generating unnecessarily high water, gas or electricity bills, producing gaseous or sewage smells, or experiencing water damage on walls, floors or ceilings. It’s important to call a technician at the first signs of a leak, as leaving the issue unresolved may result in excessively high bills, water/mould damage to the property, carbon monoxide poisoning, and even fire hazards.

How we can help

We can find and fix any leak on your property, ranging from gas leaks to sewage and stormwater leaks. Our services in leak detection include resolving issues caused by pipes rattling within the walls, leaking pipes in walls, pipe replacements and installations.

Service step-by-step process

(02) 8999 6125 Save $50 if you make a booking online!

Leak Detection

Leaking plumbing is something we’ve all experienced, and can be extremely frustrating to deal with. This is made worse by the fact that not all leaks are as easy to pinpoint as, for example, an exposed tap under your sink with a visibly broken seal. Many times, it is impossible for the average homeowner to locate the location of a leak within walls, underground, or even in exposed piping where the source is not immediately obvious. This is especially true for gas and sewerage leaks. Some telltale signs you may have a leak include:

  • Damp or discoloured walls, ceilings or floors
  • Dank, musty odour
  • Signs of water on pipes, as well as on other home fittings, that is not condensation
  • Unexpected paint damage (spot fading, flaking, cracking)
  • Odour of gas
  • Occasional odours of sewerage, or other unpleasant smells
  • Low water pressure
  • Knocking pipes, hissing, or sound of water running

Even the smallest water leak is no joking matter – due to the water pressure running through our homes, that same leak can quickly turn into a torrent of water that not only damages your plumbing but destroys your home and belongings. Our cutting-edge Sydney leak detection services allow our experienced technicians to find and repair water, gas and sewerage leaks before they result in high utility bills and costly damage.

Cutting-Edge Leak Detection Methods

At Dial Up Plumbing, our leak detection services are both rapid and as non-intrusive as possible. To achieve this, we use the most advanced water leak detection equipment as well as technology to diagnose other types of leaks. Advanced Leak Detection Systems can utilise a number of modern methods, including:

Audio detection– This type of equipment allows technicians to hear behind walls, in floors/ceilings and underground – even at volumes and frequencies not detectable to the human ear.

Thermal imaging– Leaking liquids or gases can create temperature differences at their point of escape. Thermal camera systems quickly show these unexpected hot or cold spots, and are especially helpful in dark areas and spots that are hard to get close to.

Miniature cameras– Extremely helpful in detecting leaks inside of walls and in tight spots like attic crawl spaces and roofs, tiny cameras such as fibre optic cameras allow technicians to inspect spaces that would otherwise require removal of building infrastructure. This is particularly advantageous because just ruling out these areas would otherwise require altering your home’s infrastructure to get a good look.

Early Leak Detection

Any leak, large or small, will eventually result in damage to your property. Firstly, the exposure of external pipes, seals, fittings and connectors to leaking liquid or gas promotes oxidation and rotting, dramatically shortening the life of your piping. Our pipe leak detection and Sydney water leak detection services, therefore, extend the life of your plumbing. Leaks also cause extensive damage to your walls, ceilings and floors – both water damage and damage from the resulting mould.

When piping completely collapses, the flooding causes catastrophic damage to your home and can destroy many of your beloved possessions. It is imperative that all leaks are detected before getting to this stage.

Just a small leak can have a negative effect on your water or gas bill. Left unchecked, it is not uncommon for bills to double or worse – and the utility companies will not reimburse you for charges due to leaks. Detecting a leak early on can save you hundreds or even thousands of dollars in bills.

Worst of all, an undiagnosed leak can put you and your family in danger. Water damage can weaken the structure of your house and cause wall, floor or support collapses. Without water pipe leak detection, water dripping on wiring can cause a fire, as can leaking gas. Gas leaks can result in carbon monoxide poisoning.

Early leak detection not only protects your home, but it also protects you and your loved ones from potential injury or serious illness.

Advanced Sydney Leak Detection

With decades of combined experience and the most advanced equipment, Dial Up Plumbing is your best option for Sydney water leak detection, as well as the detection of other leaks such as gas and sewerage. We even have the ability to pinpoint notoriously hard-to-find issues with our advanced leak detection methods. To find out more about our leak detection services, contact ustoday!

How do you check for leaks?

Other than leaks that are clearly visible in piping and at seal points, it can be quite difficult for the average homeowner to find leaks. Dial Up Plumbing uses advanced leak detection methods and equipment to quickly pinpoint the exact location of all types of leaks.

Leak Detection Cost Sydney

Depending on the leak, simple or more advanced detection methods may be required. In either case, Dial Up Plumbing offers affordable rates so that your leak may be found before causing damage. Contact ustoday for a quote or to learn more.

How does a leak detector work?

We use a number of different types of advanced leak detectors at Dial Up Plumbing. Miniature cameras help us find leaks in small spaces, thermal cameras detect leaks by analysing the temperature differences they cause, and audio leak detectors allow us to hear the telltale noises of leaks, even through walls.

Dial Up Plumbing: Water Leak Detection Sydney (2024)

FAQs

How accurate is leak detection? ›

Leak detections are perfect for tracing leaks' location at home or in the office. With an accuracy rate of 90%, leak detection techniques are reliable.

How much does a water leak detection system cost? ›

Smart water sensors cost anywhere from $50 to over $500.

How does plumbing leak detection work? ›

Leak detection systems work by monitoring water flow through either a mechanical turbine or ultrasonic wavelengths. These leak detection systems observe the pattern of the water flow, either by counting the volume of water passing through the sensor or sonically recording the time delay.

How do you find a leak in a hidden pipe? ›

Check Hidden Pipes

Start with the meter test discussed above. After this, check for areas that have rotting wood, mildew, or mold on walls, ceilings, or floors. These are signs of a plumbing leak in hidden pipes. Another way to inspect leaks from hidden pipes is by checking for heat from an area beneath the surface.

What are the disadvantages of leak detection? ›

Detection cable system

One time usable, if the cable detects a leak or comes into contact with spilt oil, it becomes inoperable and must be changed before the system can detect a second leak. Expensive maintenance, each time oil comes into contact with the cable, it needs to be changed. Slow operating time.

Which method is best for leak detection? ›

Ultrasound testing is the most accurate option when it comes to leak detection. This method uses high-frequency sound waves to detect irregularities in pipes and tubing, which can indicate the presence of a leak.

Are water leak detectors worth it? ›

It's a good idea to place water sensors in areas where water damage inside the home can occur, often without warning. Those areas include: washing machines, hot water heaters (they may fail), dishwashers (they may leak), supply lines to automatic ice makers (they may be damaged) and toilets (they may overflow).

Why is leak detection so expensive? ›

Why is leak detection so expensive? There is no one process for leak detection. The high price comes from using many different devices and products to locate the issue. You don't want to go for a budget option when it comes to leak detection in your home.

How to detect where a water leak is coming from? ›

Here are seven ways to find hidden leaks in your home before calling for water leak repair.
  1. Water Meter Test. ...
  2. Water Pressure Test. ...
  3. Listen for Running Water. ...
  4. Check your Appliances for Leaks. ...
  5. Check Your Toilet for Leaks. ...
  6. Check Your Utility Bills. ...
  7. Water Drips and Wet Walls.
Feb 23, 2022

How do I know if my pipes are leaking under my floor? ›

Additionally, if there is a soft spot, stains, or warping on your bathroom floor, it might be a result of a hidden pipe leak beneath the floor. You may also notice the carpeted areas developing a musty smell or becoming moist in the basem*nt. The caulking in the kitchen tiles might also start peeling or cracking.

Can plumbers detect leaks behind walls? ›

Once you know you have a leak, you'll need to hire a plumber. But how do plumbers find leaks? Plumbers use moisture meters and determine the area of the wall with the highest moisture levels. Sometimes, leaks are located using infrared cameras, which point out the coolest (and wettest) areas behind the walls.

How long does a leak detection take? ›

How Long Does It Take for a Leak to Be Detected? It can be difficult to pinpoint exactly how long it takes for a leak to be detected, but the process itself usually only takes about an hour.

Where is the most common place for a water leak? ›

Here are the 7 most common places for leaks to occur in your home:
  • Around your toilet. ...
  • Under the sink. ...
  • At the base of your water heater. ...
  • In your showers and tubs. ...
  • Around exterior spigots. ...
  • On your ceilings.

What is the most common water leak in the house? ›

“The most common leaks in the home that waste the most water include dripping faucets, dripping shower heads, and running toilets.

Is there a tool to find a water leak underground? ›

Ground Penetrating Radar (GPR) is a powerful tool for finding underground pipe leaks.

How accurate are refrigerant leak detectors? ›

Because light absorption in the IR spectrum is gas-specific, they are the least susceptible to false-positive alarms and considered highly accurate across all refrigerant types. Infrared detectors also have the edge with newer refrigerants that contain less chlorine and fluorine, the trigger for heated-diode sensors.

Are leak detectors worth it? ›

Leak detection systems help prevent major water damage in homes.

How do you determine where a leak is coming from? ›

7 Effective Methods To Identify Hidden Water Leaks In Your Home
  1. Conduct a Visual Inspection. ...
  2. Check Faucets, Showerheads, and Toilets. ...
  3. Examine Outdoor Areas. ...
  4. Utilize Technology. ...
  5. Conduct a Pressure Test. ...
  6. Seek Professional Home Leak Detection Services. ...
  7. Importance of Professional Home Leak Detection Services.

What is the leak rate of a leak detector? ›

A leak rate is expressed as a volume per unit of time. The rate is found by measuring the change in pressure multiplied by the volume. That number is then divided by the change in time multiplied by the surrounding atmospheric pressure to calculate the leak rate (SCCM). Δt = The amount of decay time (min.)

References

Top Articles
Latest Posts
Article information

Author: Clemencia Bogisich Ret

Last Updated:

Views: 5265

Rating: 5 / 5 (60 voted)

Reviews: 83% of readers found this page helpful

Author information

Name: Clemencia Bogisich Ret

Birthday: 2001-07-17

Address: Suite 794 53887 Geri Spring, West Cristentown, KY 54855

Phone: +5934435460663

Job: Central Hospitality Director

Hobby: Yoga, Electronics, Rafting, Lockpicking, Inline skating, Puzzles, scrapbook

Introduction: My name is Clemencia Bogisich Ret, I am a super, outstanding, graceful, friendly, vast, comfortable, agreeable person who loves writing and wants to share my knowledge and understanding with you.