Eurorack Cases & Skiffs (2024)

Everything you need for housing your modules. Complete Eurorack cabinets or parts to built your own enclosurers.

Eurorack Cases & Skiffs (1)

Sort by

  • Tiptop Audio - Mantis Black Eurorack Case

    Tiptop Audio - Mantis Black

    Black Eurorack Case

    Mantis has two rows of 104HP for you to rack your modules. It comes fully powered and assembled, just drop in your modules and play.

    Using its sophisticated leg mechanism you can…

    € 479,00€ 399,00

  • Tiptop Audio - Dual Mantis Studio Brackets (Black!)

    Tiptop Audio - Dual Mantis Studio Brackets (Black!)

    Dual Mantis Studio Brackets (BLACK)For the Black MantisUsing the optional bracket accessory Mantis can be doubled up to 416HP! Multiply your Mantis and watch your studio setup…

    € 58,00€ 49,00

  • Tiptop Audio - Dual Mantis Studio Brackets (White!)

    Tiptop Audio - Dual Mantis Studio Brackets (White!)

    Dual Mantis Studio Brackets (WHITE)Using the optional bracket accessory Mantis can be doubled up to 416HP! Multiply your Mantis and watch your studio setup grow…The Dual…

    € 58,00€ 49,00

  • Doepfer A-100LCBv Low Cost Base with PSU3 Vintage Edition (eurorack case)

    Doepfer A-100LCBv Low Cost Base with PSU3 Vintage Edition

    Two rows with 84 HP for installation of modules

    Same as the A-100LCBsw case but painted vintage black like the A-100 Minicase black

    The A-100 Low Cost Base has the same…

    € 630,00€ 548,00

  • Doepfer A-100LC1V Low Cost Case Vintage Vers. 100-240V (eurorack case)

    Doepfer A-100LC1V Low Cost Case Vintage Vers. 100-240V

    The A-100LC1V is very similar to the A-100LC3v but offers only 48 HP for installation of modules. A-100LC3v is equipped with the power supply A-100SSB.
    The case is made of…

    € 235,00€ 195,00

  • MS200W - Aluminium Eurorack Skiff 197 HP, White finish

    MS200W - Aluminium Eurorack Skiff197 HP, White finish, Unpowered

    Aluminium Eurorack Enclosure (powersupply and busboards excluded)

    Included: Rubber feet, 4x 84 HP threaded strips (3mm), 8x sliding nuts…

    € 449,00€ 399,00

  • MS200S - Aluminium Eurorack Skiff 197 HP, Silver/Aluminium finish

    MS200S - Aluminium Eurorack Skiff 197 HP, Silver/Aluminium finish

    Aluminium Eurorack Enclosure (powersupply and busboards excluded)

    Included: Rubber feet, 4x 84 HP threaded strips (3mm), 8x sliding nuts…

    € 449,00€ 399,00

  • MS Elite Eurodesk/rack 3x 126HP (Whitefinish)

    MS Elite Eurodesk/rack 3x 126HP (White finish)

    Unieke en zeer fraaie eurorack case

    The case consist of 2 full Aluminum cases (126 HP 6U + 126 HP 3U) mounted together with two Bamboo sidepanels.

    Power is supplied by 2x Tiptop…

    € 1.250,00

  • MS-84WB 84HP Skiff white + Bamboo (eurorack case)

    MS-84WB 84 HP Skiff, white finish and Bamboo sidepanels

    Unieke zeer fraaie eurorack case

    Module depth max. 55 mm

    Inside depth to frontplates 60mm

    Outside measures: WxHxD : 476x 76x 190mm

    Made of aluminium and…

    € 299,00€ 199,00

  • MS-84SB 84HP Skiff silver + Bamboo (eurorack case)

    MS-84SB 84HP Skiff silver + Bamboo

    Unieke zeer fraaie eurorack case

    MS-84SB 84 HP Skiff, Silver finish and Bamboo sidepanels

    Module depth max. 55 mm

    Inside depth to frontplates 60mm

    Outside measures: WxHxD : 476x 76x…

    € 299,00€ 199,00

  • MS-84BB 84HP Skiff Black + Bamboo (eurorack case)

    MS-84BB 84HP Skiff Black + Bamboo

    Unieke zeer fraaie eurorack case

    MS-84BB 84 HP Skiff, Black finish and Bamboo sidepanels

    Module depth max. 55 mm

    Inside depth to frontplates 60mm

    Outside measures: WxHxD : 476x 76x…

    € 299,00€ 199,00

  • on request

    Doepfer A-100LCBsw Low Cost Base with PSU3 (eurorack case)

    Same as Doepfer A-100LCB but with PSU3 in stead of PSU2

    The A-100 Low Cost Base has the same width as the A-100 Low Cost Cases (A-100LC6/LC9) and is planned as a base frame for the A-100 Low Cost Cases. But it can be used also as…

    € 560,00

  • Doepfer A-100LC6sw Low Cost Frame with PSU3 (eurorack case)

    Same as A-100LC6 case but now with PSU3 in stead of PSU2

    This is an economical version of the A-100 suitcase. It is made very simple without front cover, without the metal rails and corners of the suitcase version described…

    € 470,00€ 399,00

  • on request

    Doepfer A-100LC9sw Low Cost Frame with PSU3 (eurorack case)

    Same as A-100LC9 case but now with PSU3 in stead of PSU2

    This an enlarged version of the A-100 low cost case with 9 U or three rows of modules. As only one power supply is required this is the most economic version of the A-100…

    € 560,00

  • on request

    Doepfer A-100LMB Low Cost Monster Base

    DOEPFER A-100LMB LOW COST MONSTER BASEDoepfer A-100LMBV is a low-cost case for Eurorack synthesizer modules.

    It is designed as a base for the Doepfer A-100LMS9V Case and has 2X3 height units, which are angled towards each other.…

    € 950,00

  • on request

    Doepfer A-100LMS9 Low Cost Monster Case 9U PSU3

    Doepfer A-100LMS9 Low Cost Monster Case 9U PSU3

    Doepfer A-100LMS9 is a low-cost case for Eurorack synthesizer modules.

    The case has 3x3 U with 168 HP each.It includes two A-100PSU3 power supplies and six busboards.
    ∙ 3x3 U…

    € 980,00

  • on request

    Doepfer A-100LC6v Low Cost Frame with PSU3 Vintage Edition (eurorack case)

    Doepfer A-100LC6v Low Cost Frame with PSU3 Vintage Edition (black)

    Two rows with 84 HP for installation of modules

    Same as the A-100LC6sw case but painted vintage black like the A-100 Minicase black

    New: Since spring 2016 the…

    € 540,00

  • on request

    Doepfer A-100LC9v Low Cost Frame with PSU3 Vintage Edition (eurorack case)

    Doepfer A-100LC9v Low Cost Frame with PSU3 Vintage Edition (black)

    Three rows with 84 HP for installation of modules

    Same as the A-100LC9sw case but painted vintage black like the A-100 Minicase black

    This an enlarged version…

    € 630,00

  • MS Elite Eurodesk/rack 3x 70HP (White finish)

    MS Elite Eurodesk/rack 3x 70HP (White finish) (total 210HP)

    The case consist of 2 full Aluminum cases (70 HP 6U + 70 HP 3U) mounted together with two Bamboo sidepanels.

    Power supply and flying busboards are optional.

    The case…

    € 450,00

  • 4ms - Pod20 UnPowered

    4ms - Pod20 Powered (Please, check first the depth of your modules!!)

    Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

    The Pod20 is 20HP with 1.34" (34mm) of available module…

    € 50,00

  • 4ms - Pod26 UnPowered

    4ms - Pod26 UnPowered (Please, check first the depth of your modules!!)

    Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

    The Pod26 Unpowered is 26HP with 1.34" (34mm) of available…

    € 55,00

  • 4ms- Pod60 UnPowered

    4ms- Pod60 UnPowered (Please, check first the depth of your modules!!)

    Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

    The Pod60 Unpowered is 60HP with 1.34" (34mm) of available…

    € 79,00

  • 4ms - Pod20 Powered + 4ms powerbrick included

    4ms - Pod20 Powered (4ms powerbrick 45W included) (Please, check first the depth of your modules!!)

    ( micky-mouse-powercable excluded! Keep in mind the depth of your modules!)

    Low-cost, portable, compact enclosure that turns…

    € 125,00

  • 4ms - Pod26 Powered + 4ms powerbrick included

    4ms - Pod26 Powered (4ms powerbrick 45W included) (Please, check first the depth of your modules!!)

    Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

    ( 230V micky-mouse-powercable…

    € 129,00

  • 4ms- Pod60 Powered + 4ms Powerbrick included

    4ms- Pod60 Powered (4ms powerbrick 45W included) (Please, check first the depth of your modules!!)

    Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

    (230V micky-mouse-powercable…

    € 199,00

  • MS370 3U 70HP case

    MS370 3U 70HP case

    MS370 3U 70HP Aluminium case with Small Bamboo sidepanels

    1x 70HP

    Full anodized aluminium case

    Thin Bamboo side panels.

    No Power: No PSU included.

    module depth max 55mm

    2x 15 sliding nuts M3

    outside…

    € 140,00

  • on request

    MS-Trinity - Eurorack performance desk , Drie delig

    MS-Trinity - Eurorack performance desk , Drie delig

    Bestaande uit:

    2x MS Elite Eurodesk/rack 3x 126HP (Alu finish),

    1x MS Elite Eurodesk/rack 3x 70HP (Alu finish)

    (Totaal dus 756 + 210 = 966 HP)

    (Geen verzending, alleen…

    € 2.440,00

  • on request

    Doepfer A-100PMS9 Single Monster Case 9 HE PSU3

    Doepfer A-100PMS9 Single Monster Case 9 HE PSU3

    A-100PMS9

    Single version of the 9U/168HP A-100 monster case with 9U/168HP (A-100PMS9):

    outside dimensions (with front cover, closed state): ~ 90 (length) x 48 (height) x 23…

    € 1.360,00

  • on request

    Doepfer A-100PMS12 Single Monster Case 12 HE PSU3

    Doepfer A-100PMS12 Single Monster Case 12 HE PSU3

    A-100PMS12

    Single version of the 12U/168HP A-100 monster case

    outside dimensions (with front cover, closed state): ~ 90 (length) x 62 (height) x 23 (depth) cm
    weight of the…

    € 2.030,00

  • MS Elite Eurodesk/rack 3x 126HP (Black)

    MS Elite Eurodesk/rack 3x 126HP (Black)

    Unieke en zeer fraaie eurorack case met speciale doorvoer voor externe voeding voor Aira modules (system1m, Torcido etc.) om eurorack voeding te ontlasten.

    The case consist of 2 full…

    € 1.250,00

Eurorack Cases & Skiffs (2024)

FAQs

What is the best first module for Eurorack? ›

What are the best starter Eurorack modules? If you want a solid start in Eurorack then get a multiple engine oscillator like the Behringer Brains, get a Dreadbox Eudemonia as a filter and VCA and a Robaux 3PT as an awesomely versatile modulator. You'll find all three on our list.

How deep is the Nifty case? ›

Internal depth of 55mm gives you more depth than many comparable Eurorack cases offer.

What is a skiff modular? ›

In modular synthesizers, a skiff is a small enclosure meant to accommodate usually 4 to 8 modules, perhaps with some storage space for patch cords. The skiff is intended to be small, portable, and lightweight. This is to facilitate taking the synth to live gigs, busking, and spur-of-the-moment performances.

How big is 1 hp Eurorack? ›

Eurorack rails are measured by their length in HP (HP as explained in the Horizontal Pitch blog), with 1 HP being 1/5 inch or 5.08mm. The eurorack spacing standard between 2 rails is the distance of 3U, which is the equivalent of 5.25” or 133.35mm.

What does every Eurorack need? ›

Four Things You'll Need
  • Eurorack case.
  • Power supply.
  • Modules.
  • Patch cables.
May 7, 2020

What is the best synth sequencer for beginners? ›

  • Arturia MiniFreak 37-key Hybrid Synthesizer. ...
  • Behringer Pro-800 8-voice Polyphonic Analog Synthesizer. ...
  • Roland AIRA Compact S-1 Tweak Synth. ...
  • Korg microKORG Synthesizer with Vocoder. ...
  • Novation MiniNova 37-key Synthesizer with Vocoder. ...
  • Novation Bass Station II Analog Synthesizer. ...
  • Yamaha Reface CS Virtual Analog Synthesizer.
Feb 20, 2024

What is the advantage of a skiff? ›

Skiff boats are known for their simplicity, devoid of complex electrical or plumbing systems. They usually consist of a hull, an outboard engine, a few seats for passengers, and convenient fishing rod holders for angling enthusiasts.

What is the purpose of a skiff? ›

Versatility: Suitable for various activities, skiff boats can be used for fishing, hunting, transportation, and leisure. Shallow Draft: The flat bottom allows skiff boats to navigate in shallow waters where larger boats cannot go.

Is it safe to use skiff? ›

It uses end-to-end encryption, which means that your data is secure and only the senders and recipients of messages can read them. But be aware that messages between Skiff and non-Skiff users travel unencrypted between the Skiff service and the non-Skiff user.

What does HP stand for in Eurorack? ›

Horizontal pitch (HP) is a unit of length defined by the Eurocard printed circuit board standard used to measure the horizontal width of rack mounted electronic equipment, similar to the rack unit (U) used to measure vertical heights of rack mounted equipment. One HP is 0.2 inches (5.08 mm) wide.

What does 3U mean in Eurorack? ›

The physical specification is based on the Eurocard standard of: 3U (5.06 inches or 128.5 mm), where height "U" is measured in rack units, rounded for a lip (nb: 3U in standard rack units would be 5.25 inches or 133.3 mm). 1HP (0.2 inches or 5.08 mm), where width "HP" is measured in horizontal pitch units.

Who invented Eurorack? ›

Eurorack is a format of modular synthesizer invented by Dieter Doepfer which is basically a miniaturized version of the original formats used in the 60s and 70s by Moog and Roland.

What was the first Eurorack synth? ›

In 1996, Doepfer Musikelektronik released the first Eurorack-format modular synthesizer system, the Doepfer A-100, followed by successive new series of compatible modules in 1997 and 1998.

What is moog mother 32? ›

Mother-32® is an intuitive and expandable semi-modular synthesizer that adds raw analog sound, powerful sequencing and extensive interconnectivity to any creative, electronic or modular ecosystem.

Is Moog matriarch Eurorack compatible? ›

In addition to its standalone function, Matriarch is also an ideal processor of external sound sources and a powerful keyboard front-end for expanding a DFAM, Mother-32, Grandmother, or Eurorack modular system.

Is Buchla compatible with Eurorack? ›

These aren't simply "inspired by" Buchla designs—these are actual Buchla 200 circuits modified largely just to accommodate the format-specific requirements of Eurorack, such as voltage levels, power supply, connection types, and of course, they are modified in layout to fit into a standard 3U Eurorack rack space.

References

Top Articles
Latest Posts
Recommended Articles
Article information

Author: Sen. Emmett Berge

Last Updated:

Views: 5745

Rating: 5 / 5 (60 voted)

Reviews: 83% of readers found this page helpful

Author information

Name: Sen. Emmett Berge

Birthday: 1993-06-17

Address: 787 Elvis Divide, Port Brice, OH 24507-6802

Phone: +9779049645255

Job: Senior Healthcare Specialist

Hobby: Cycling, Model building, Kitesurfing, Origami, Lapidary, Dance, Basketball

Introduction: My name is Sen. Emmett Berge, I am a funny, vast, charming, courageous, enthusiastic, jolly, famous person who loves writing and wants to share my knowledge and understanding with you.